Loading...

Resources

Resources to help you in your
machine tool business

Proper Spindle Storage Preserves Your Investment

October 29, 2022 By Dan Searles Dan Searles

Spindles are highly engineered, precision components that require special attention when storing. How a spindle is stored can significantly impact the spindle’s lifespan and performance. The key elements include:

  • Remove all internal coolant and plug all spindle ports
  • Making sure that the spindle is lubricated and wrapped correctly
  • Storing the spindle in a low-vibration and temperature-controlled environment
  • Performing frequent spindle rotation.

Coolant Removal

Setco Spindle getting ready to package for shipmentFirst, when preparing a spindle for storage, remove all coolant inside the spindle. Once removed, plug all spindle ports. Plugging mitigates the ingress of moisture, dust, or other particulate matter from the spindle. If ports are left open, material can make its way into the spindle and, ultimately, the bearings, adversely affecting spindle life and performance.

Lubrication and Wrapping

Second, the spindle needs internal and external lubrication to prevent corrosion. Internally, ensure an adequate amount of oil or grease is present in the bearings. Externally, spray the spindle with a corrosion inhibitor and wrap it in Armor Wrap oil paper or similar VCI (volatile corrosion inhibitor) packaging. We also recommend including desiccant dryers to reduce moisture. And finally, wrap the spindle in plastic to create an additional moisture barrier.

Storage Environment

placeholderThird, it is critical to store the spindle in a proper environment to reduce the likelihood of bearing damage and oxidation. The temperature range should be within 65 – 120 degrees F. Note that the temperature should be as stable as possible because when subjected to extreme temperature shifts, the lubricant’s properties can change drastically. The relative humidity level should not exceed 95%, the atmospheric pressure should be 9 to 15 psi absolute, and the storage area vibration should not exceed 1.5 mm maximum. Following these steps will reduce the likelihood of bearing brinelling, corrosion, and lubrication degradation.

Rotation

And finally, rotate the spindle several revolutions each month. This shaft movement redistributes lubricant that may have settled within the spindle. Not doing so may cause metal-on-metal contact and cause bearing micro-welding, which adversely affects spindle performance.

You’ve invested significant money in keeping spares on hand. This is wise since spares keep your operation running when a spindle goes down. Following these steps will significantly increase the likelihood of a successful spindle installation and an increased MTBF.

All Locations WorldWide

Find Location

  • All Locations
  • NOVI, MI
  • CINCINNATI, OH
  • LAWRENCEVILLE, GA
  • RAMOS ARIZPE, COAHUILA, MEXICO
  • PUNE, MAHARASHTRA
  • CHENNAI, INDIA
  • DELHI, INDIA
  • TAICHUNG, TAIWAN
  • SHANGHAI, CHINA